Vitni
Vehicles & powered equipmentModerate15 min

Replace a worn windscreen wiper blade

Fit the correct replacement blade and protect the windscreen while the wiper arm is raised.

Every step has an illustration. Follow the written instructions and safety notes as your guide.

Text and available illustrations stay on this device. Photo analysis needs an internet connection.
A compatible windscreen wiper blade being fitted with the arm supported

Take it one step at a time

Repair steps

  1. Confirm blade fit

    Check the vehicle manual for blade length, connector type, and any service-position procedure. Do not guess from length alone.

    Illustration for Replace a worn windscreen wiper blade, step 1

  2. Protect the glass

    Park safely, switch the ignition off, and place a folded towel on the windscreen beneath the wiper arm before lifting it.

    Illustration for Replace a worn windscreen wiper blade, step 2

  3. Release the old blade

    Release the old blade using the connector’s marked latch. Keep control of the spring-loaded arm and never let it fall onto the glass.

    Illustration for Replace a worn windscreen wiper blade, step 3

  4. Lock and test the new blade

    Attach the matching replacement until its lock engages, lower the arm slowly, then test with washer fluid while parked.

    Illustration for Replace a worn windscreen wiper blade, step 4