Vitni
Garden & outdoorEasy10 min

Replace a leaking garden hose washer

Swap a worn connector washer after shutting off and depressurizing the hose.

Every step has an illustration. Follow the written instructions and safety notes as your guide.

Text and available illustrations stay on this device. Photo analysis needs an internet connection.
A garden hose coupling and a matching replacement washer

Take it one step at a time

Repair steps

  1. Shut off the water

    Turn off the tap, then squeeze the hose trigger or open the nozzle until water pressure is released.

    Illustration for Replace a leaking garden hose washer, step 1

  2. Remove the old washer

    Unscrew the connector by hand and remove the loose or flattened washer without damaging the connector seat.

    Illustration for Replace a leaking garden hose washer, step 2

  3. Match the replacement

    Match the replacement washer to the connector’s inside diameter, thickness, and profile. Do not force a near-fit.

    Illustration for Replace a leaking garden hose washer, step 3

  4. Reconnect and check

    Seat the washer flat, reconnect the hose by hand, turn the water on slowly, and check for drips. Shut off the tap if it still leaks.

    Illustration for Replace a leaking garden hose washer, step 4