Vitni
Toys & leisureEasy10 min

Replace a worn badminton overgrip

Wrap a fresh overgrip over an intact handle, keeping the butt cap and grip secure.

Every step has an illustration. Follow the written instructions and safety notes as your guide.

Text and available illustrations stay on this device. Photo analysis needs an internet connection.
A fresh overgrip being wrapped around an intact badminton racket handle

Take it one step at a time

Repair steps

  1. Inspect the racket handle

    Check the racket handle and butt cap for cracks or movement. Do not use the racket if either is loose or damaged.

    Illustration for Replace a worn badminton overgrip, step 1

  2. Remove the old wrap

    Peel away the worn overgrip without cutting into the original grip or handle beneath it.

    Illustration for Replace a worn badminton overgrip, step 2

  3. Start at the butt cap

    Start the replacement overgrip at the butt cap, following the taper or starter strip supplied with it.

    Illustration for Replace a worn badminton overgrip, step 3

  4. Wrap and secure

    Wrap with even overlap and light tension, then secure the end with finishing tape. Hold the racket and check that the wrap does not twist.

    Illustration for Replace a worn badminton overgrip, step 4